EN-ISO 13982-1:2004
Protective clothing intended for use against solid particulates Performance requirements for chemical protective clothing providing protection to the full body against airborne solid particulates (Type 5) (ISO 13982-1:2004)
MATERIALS
Classified according to EN 14325:2004 (according to the clauses set forth in the same standard)
Preconditioning (clause 4.2 EN 14325:2004): 5 cycles of washing according to the manufacturer´s directions (if laundering is provided for)
Conditioning (clause 4.3 EN 14325:2004): 24 hours at (20 ± 2) °C and (65 ± 5) %RH in accordance with EN 20139 – Start the tests within 5 minutes after removing the test specimen – Conditioning may be omitted where it is demonstrated that the test results are not invalidated by changes in temperature and/or humidity
TABLE REQUIREMENTS
-
![]()
Diagram for inward leakage test
MARKING
Chemical
Marking according to EN 340
Marking for chemical hazards according to the relevant standard with the addition of:
Marking for chemical hazards according to the relevant standard with the addition of:
Type 1a ET
EN- ISO 13982-1:2004
year of manufacture and, where appropriate, the date of expiry (it may be on the packaging)
Type of protective clothing(*)
year of manufacture and, where appropriate, the date of expiry (it may be on the packaging)
Type of protective clothing(*)
Information
– Year of manufacture and, where appropriate, the date of expiry (it may be on the packaging)
– The “read instructions for use” pictogram
– Care symbols complying with ISO 3758
– The “read instructions for use” pictogram
– Care symbols complying with ISO 3758
(*) = the pictogram shown is optional and the property of INDUTEX
Related
Products
Latest News
Un anno fa ci salutava il fondatore di Indutex
Un anno fa ci salutava il fondatore di Indutex, Mario Rossin.
Contacts
Address
INDUTEX SPA
Street S.Francesco, 8/10 20011 Corbetta (MI) Italy
Click on the "Get direction" at the top right up of the map calculates the route to reach us.