EN ISO 13034: 2005
Protective clothing intended for use against liquid chemicals Performance requirements for chemical protective clothing that offers limited protection against liquid chemical agents (Type 6 and PB [6] Equipment)
MATERIALS
Classified according to EN 14325:2004 (according to the clauses set forth in the same standard)
Preconditioning (clause 4.2 EN 14325:2004): 5 cycles of washing according to the manufacturer´s directions (if laundering is provided for)
Conditioning (clause 4.3 EN 14325:2004): 24 hours at (20 ± 2) °C and (65 ± 5) %RH in accordance with EN 20139 – Start the tests within 5 minutes after removing the test specimen – Conditioning may be omitted where it is demonstrated that the test results are not invalidated by changes in temperature and/or humidity
TABLE REQUIREMENTS
Seams table (Type 6 e type PB[6])
SEAMS, JOINS AND ASSEMBLAGES (Type 6 only)
MARKING
Chimical
Marking according to EN 340
Marking for chemical hazards
Type 1a ET
- EN 13034:2005
- Year of manufacture and, if the date of expiry is due to fall within 24 months, the month
- Type of protective clothing(*)
Information
- The “read instructions for use” pictogram
- “only for reusable” garments, instructions for care in accordance with EN 23758
- For “single-use” garments the phrase “do not reuse”
(*)= The pictogram shown is optional and INDUTEX property